Sanitary Ball Valve For Food And Chemical Use With ISO Mount Plate
- Locking device can be required.
- 100% air tested under water at 100psi, open and closed positions.
- Hydrostatic test pressure 1/4"~2" 1,500psi, 2 1/2"~4" 1,200psi.
-
Standard End: Weld & Clamp-End:
- Other SMS. DIN. RJT. IDF
- Male/Male can be required.
Designation
| ITEM | PARTS | MATERIAL |
|---|---|---|
| 1 | BODY | ASTM-A351-CF8M |
| 2 | CAP | ASTM-A351-CF8M |
| 3 | BALL | A351-CF8M |
| 4 | SEAT | PTFE |
| 5 | GASKET | PTFE |
| 6 | STEM | ANSI-316 |
| 7 | THRUSTWASHER | PTFE |
| 8 | STEM PACKING | PTFE |
| 9 | BOLT | ANSI-304 |
| 10 | HEX NUT | ANSI-304 |
| 11 | BOLT WASHER | ANSI-304 |
| 12 | GLAND | ANSI-304 |
| 13 | WASHER | ANSI-304 |
| 14 | NUT | ANSI-304 |
| 15 | HANDLE | ANSI-304 |
| 16 | PLASTIC COVER | PLASTIC |
| 17 | LOCK DEVICE | ANSI-304 |
| 18 | STOP PIN | ANSI-304 |
Specification
| Size |
DN mm |
ISO-5211 mm |
C mm |
L mm |
W mm |
Ød mm |
ØD mm |
R mm |
L1 mm |
|---|---|---|---|---|---|---|---|---|---|
| 1/2" | 15 | F03 | 60 | 89 | 132 | 9.5 | 25.4 | 5 | 32.75 |
| 3/4" | 20 | F03 | 64.5 | 101 | 131.5 | 15.8 | 25.4 | 5 | 36.5 |
| 1" | 25 | F04 | 69.2 | 114 | 165 | 22.2 | 50.4 | 6.5 | 40 |
| 1-1/2" | 40 | F05 | 89.26 | 140 | 194.3 | 35 | 50.4 | 8.5 | 43.5 |
| 2" | 50 | F05 | 97.26 | 156 | 194.3 | 47.6 | 63.9 | 8.5 | 45.75 |
| 2-1/2" | 65 | F07 | 126.8 | 197 | 252 | 60.3 | 77.5 | 12 | 56 |
| 3" | 80 | F07 | 135.3 | 229 | 252 | 73 | 90.9 | 12 | 64.5 |
| 4" | 100 | F10 | 158.8 | 242.7 | 332 | 97.4 | 118.9 | 16 | 60.6 |
-
-
-
Mount Actuator For Ball Valve
Ball valve
Mount actuator is the direct mount configuration. It can be equipped low & high bracket. The top of ball valves for greater reliability, easy installation and improved cycling life.
-
Mount Actuator For Ball Valve
Ball valve
Mount actuator is the direct mount configuration. It can be equipped low & high bracket. The top of ball valves for greater reliability, easy installation and improved cycling life.
-
Sanitary 3 Way Ball Valve
3 Way Ball valve
SERIES: Y-4HCS FOUR PIECE THREE WAY MULTI-PORT 1000 WOG SANITARY BALL VALVE TRI-CLAMP END T/T/T
-
Sanitary 3 Way Ball Valve
3 Way Ball valve
SERIES: Y-4HCS FOUR PIECE THREE WAY MULTI-PORT 1000 WOG SANITARY BALL VALVE TRI-CLAMP END T/T/T
-
-
-
-
2 Way Plug Valves
2 Way Plug Valves
Plug Valve are excellent sanitary devices with minimal pressure drops. This kind of valve is constructed with a special taper which has been carefully designed to reduce wedging and galling. Plug valves are made of type 316 stainless steel and come in the clamp and butt-weld end configuration. Available in rubber or stainless steel plugs. Note: Plug valves, because of inherent design, is recommended only for low pressure applications.... 25 psi maximum; for use with non-hazardous products, and at temperatures not to exceed 100°F. They are subject to leakage almost normal operating, maintenance, and cleaning procedures.
-
3 Way Plug Valves
3 Way Plug Valves
Plug Valve are excellent sanitary devices with minimal pressure drops. This kind of valve is constructed with a special taper which has been carefully designed to reduce wedging and galling. Plug valves are made of type 316 stainless steel and come in the clamp and butt-weld end configuration. Available in rubber or stainless steel plugs. Note: Plug valves, because of inherent design, is recommended only for low pressure applications.... 25 psi maximum; for use with non-hazardous products, and at temperatures not to exceed 100°F. They are subject to leakage almost normal operating, maintenance, and cleaning procedures.
-
